|
MATERIAL SAFETY
DATA SHEET |
| 1. IDENTIFICATION OF
THE SUBSTANCE/PREPARATION AND OF THE COMPANY |
| Product Name: |
FOSPLUS |
| Application: |
Liquid feed conditioner |
| Company: |
Agil Ltd. |
| Address: |
Hercules 2, Calleva Park, Aldermaston,
Reading, RG7 8DN. |
| Country: |
United Kingdom. |
| Tel/Fax No's: |
| Tel: + 44 (0) 118
981 3333 |
Fax: |
+ 44 (0) 118 981
0909 |
| Emergency Number:
out of hours- |
|
+ 44 (0) 118 926
5589 |
| |
|
+ 44 (0) 118 947
4407 |
|
|
| 2. COMPOSITION/INFORMATION
ON INGREDIENTS |
| |
| Substance: |
Inulin ~ from
chicory root |
Hydrated Aluminium
Silicate (E559) |
| |
|
Kaolinite |
Micaceous
mineral |
Feldspar |
Quartz |
Carbonaceous
material |
| % content: |
<25 |
52.0 – 57.0 |
10.0 – 14.0 |
6.5 – 10.5 |
0.5 – 2.5 |
<1.0 |
| CAS Number: |
9005-80-5 |
1332-58-7 |
|
68475-25-5 |
14808-60-7 |
|
| Classification: |
|
|
| EINECS: |
232-684-3 |
310-127-6
(for inert natural minerals) |
|
| 3. HAZARDS IDENTIFICATION |
None.
Ensure that atmospheric dust levels are
kept to a minimum. Long term exposure
to excessive
levels of any mineral dust can lead
to respiratory problems.
|
| 4. FIRST AID MEASURES |
| Skin
Contact: |
Usually no
problems arise. Cleanse with mild soap
and water. If irritation develops seek medical attention |
| Eye
Contact: |
In case of
contact with eyes, rinse immediately
with plenty of water |
| Inhalation: |
If strong inhalation of
dust occurs it is recommended to clear
the
airways |
| Ingestion: |
If swallowed, rinse
mouth with water (only if person is
conscious)
In case of accident or if you feel
unwell, seek medical advice
immediately (show the label where possible)
|
|
| 5. FIRE FIGHTING MEASURES |
Suitable extinguishing
media: Water
Special hazards in fire: Toxic fumes of Carbon
dioxide (CO2) and Carbon monoxide
(CO)
|
| 6. ACCIDENTAL RELEASE MEASURES |
Personal
precautions: Wastes are not classified as hazardous
Environmental precautions: None
Remove spillage by vacuum, scoop or shovel.
Avoid creating dust. The use of water is
not recommended;
surfaces coated with wet material will
be a slipping hazard.
|
| 7. HANDLING AND STORAGE |
Handling: Common care and ensure low dust levels.
Storage: Store in clean dry conditions. Keep
container closed
and ensure label is intact and legible.
|
| 8. EXPOSURE/PERSONAL CONTROL |
|
| Engineering
Measures: |
N/A |
| Control
Parameters: |
None |
| Eyes: |
Wear eye/face
protection. |
| Personal
protection equipment: |
|
|
| |
At high dust
levels and if workers suffer from
dermatitis or sensitive skin
S36 Wear suitable protective clothing |
|
| 9. PHYSICAL AND CHEMICAL PROPERTIES |
| Appearance: |
White
powder |
| Odour: |
Slightly
sweet smell |
| pH |
~ pH 5.0 – 6.0 |
| Boiling
point: |
N/A |
| Melting
point: |
Inulin >158oC,
H.A.S. >1200oC |
| Flash
point: |
N/A |
| Explosive
properties: |
Non-explosive |
| Vapour
pressure: |
N/A |
| Relative
density: |
550 g/L |
| Solubility: |
Partially
soluble in water ~ 40% |
|
| 10. STABILITY AND REACTIVITY |
| Conditions
to avoid: High temperatures and high humidity
Materials to avoid: Strong oxidising agents
|
| 11. TOXICOLOGICAL INFORMATION |
Non-toxic.
Excessive exposure to dust may affect susceptible
persons as follows:
Skin contact: Mild irritation
Eye contact: Mild irritation
|
| 12. ECOLOGICAL INFORMATION |
Persitence & degradability:
40% biodegradable. 60% non-degradable
mineral composition.
Bioaccumulation: None
Aquatic toxicity: Negligible
|
| 13. DISPOSAL INFORMATION |
Disposal
must be in accordance with local and
national
legislation.
Dispose of through an authorised waste
contractor to a
licensed site.
Provided care is taken to inhibit airborne
dust, normal factory
disposal procedures may be employed using
skips and tips,
then landfill. Spillages may be swept
up. The use of water is
not recommended; surfaces coated with
wet material would
be a slipping hazard.
|
| 14. TRANSPORT INFORMATION |
No special precautions,
other than dry conditions, are
necessary.
|
| 15. REGULATORY INFORMATION |
| LABEL
FOR SUPPLY: |
| |
NONE |
| RISK PHRASES: |
None.
However, workers should be informed
of the presence
of crystalline silica and be trained
in the proper use and
handling of this product as required
under applicable
regulations.
|
| SAFETY PHRASES: |
S22 Do not breathe
dust
S26 In case of contact with eyes, rinse
immediately with
plenty of water
S36 Wear suitable protective clothing
(susceptible
persons and in dusty conditions)
|
STATUTORY INSTRUMENTS:
|
Health and Safety at
Work Act 1974.
Chemicals (Hazard Information and Packaging
for supply)
Regulations 1994.
Control of Substances Hazardous to Health
Regs 1988 (Si
1657).
Environmental Protection Act 1990.
|
| CODES OF PRACTICE: |
Waste management: The
duty of care. |
| GUIDANCE NOTES: |
Health and Safety Executive:-
Occupational exposure limits (EH
40/94)
Classification, Packaging and Labelling of Dangerous Substances Regulations
1984
|
|
| 16. OTHER INFORMATION
|
Recommendations/restrictions:
It is important
to follow the instructions detailed in
the Product
Data Sheet.
If this product is for resale, ensure
that the purchaser
receives a copy of this information.
The information herein is believed to be
correct as of the date
hereof but is provided without warranty
of any kind. The
recipient of our product is responsible
for ensuring that,
where applicable, existing laws and guidelines
are observed. |
